NF C58-401-1968 “附植”式稳态铅蓄电池组.板式

上一篇: IEC 60232-1966 核反应堆仪器的一般特性
下一篇: NF C58-402-1968 “附植”式稳态铅蓄电池组.玻璃容器

Product Code:SAE J826
Title:Devices for Use in Defining and Measuring Vehicle Seating Accommodation
Issuing Committee:Human Accom And Design Devices Stds Comm
Scope:The devices of this SAE Standard provide the means by which passenger compartment dimensionscan be obtained using a deflected seat rather than a free seat contour as a reference for defining seatingspace. All definitions and dimensions used in conjunction with this document are described in SAE J1100.The devices described in this document are intended for applications concerning seated driver side or center occupant accommodation spaces only and are not to be construed as instruments which measure or indicate occupant capabilities or comfort. This document covers only one H-Point machine installed on a seat during each test. Certified H-Point templates and machines can be purchased from:Society of Automotive Engineers, Inc.400 Commonwealth DriveWarrendale, PA 15096-0001Specific procedures are included in Appendix A for second seat measurements in short-coupled vehicles andin Appendix B for driver seat measurement of Cushion Angle.Product Code:SAE ARP1846
Title:Measurement of Far Field Noise from Gas Turbine Engines During Static Operation
Issuing Committee:A-21 Aircraft Noise Measure Noise Aviation Emission Modeling
Scope:Recommendations presented in this document are intended primarily for the acquisition of far-field noise data. The test engine is to be appropriately configured and operated so that the sound pressure levels obtained are consistent with the specific objectives of the test. The principal output of the data reduction system is one-third octave band sound pressure levels. However, when appropriate, data may be recorded for purposes of broader or narrower bandwidth analysis.